#SEAGATE HARD DRIVE RECOVERY PROFESSIONAL#

Seagate is by far the largest hard drive manufacturer but even their hard drives are susceptible to physical crashes, manufacturing defects and user error. Seagate Data Recovery & Hard Drive Crash Recovery Services To Speak with Seagate Data Recovery Specialist Call: If you have any questions, do not hesitate to contact the ACE Lab Technical Support. There are many other tips & tricks that we will be happy to share with you. As for the 2 and 3 drives, you may also compare their models to those ones produced by Samsung. To find out the Seagate F3 architecture in the fake Maxtor drive (device 6) you need to look at the model of the drive. For example, to understand that you work with HGST and WD (drives 4 and 5 in the test), you should pay attention to the PCB scheme.

#SEAGATE HARD DRIVE RECOVERY PROFESSIONAL#

Engineers who do data recovery on a professional level should have a deep knowledge of the different architectures of HDDs, and be able to distinguish these architectures. To sum up, we need to say that the intuitive approach doesn’t work for present-days HDDs anymore. When all is done, you will get the info on the drive ID. Then the utility automatically restarts the drive, makes the backup of the Service Area and cleans the SMART parameters. When the drive comes to a safe mode, the utility proposes to remove the isolation. After that, you should be able to reach the T> string after pressing Ctrl+Z, spin up the drive by the T>/2U command and then have access to all terminal commands (such as /7X, V1, V40 etc.).įor this drive, we choose the second way – to isolate the spindle motor contacts with the PC-3000 business card: By choosing this method you will need to use pincers with holding a paper-clip. Short-circuiting the reading channels.You may choose between two possible methods of LED CC unlocking: Please pay attention to the warning message before continue: Good news that PC-3000 offers the built-in solution to this error.Īll you need is to physically abort the initialization of the drive microcode at the start. In the utility, power on the drive and carefully read the terminal output.Īt this point, a wide-spread “LED CC” issue (a common bug of Seagate F3 microcode) may arise. If you don’t know the family of the drive, you may select the default family 00, F3 Arch (common). Starting menu provides a wide functionality for different families of the F3 architecture. Thus, you may control the terminal output and detect head issues in the beginning. Please note, that it’s better to run the Seagate F3 Architecture before powering on the HDD. So, we assume that we may work with Maxtor STM3500320AS drive as with the Seagate F3 architecture, Wyatt family drive.įirst of all, connect the terminal as for the Seagate F3 drive and open it in the Seagate F3 utility. Seagate drives have the same model that belongs to the Wyatt family. This fake Maxtor drive has the STM3500320AS model number. Seagate F3 (did you really think it was Maxtor?!).Samsung Trinity, M8E family (not Seagate).Samsung Trinity, M9T family (yeah, you were right).Hitachi ARM, 7210DLE6 family (not Toshiba).It may sound crazy, but the drives shown above are: Before starting the data recovery process, you should define the family and architecture of the HDD you deal with.įor example, try to guess what vendors and families should be selected for the drives listed below. Will you pass this test? Each vendor has several architectures and families of drives with their unique features. A great variety of hard drive manufacturers exist nowadays.

Seagate hard drive recovery